Wiko Fever SE APN Settings 2025: Set Up APN and MMS
Trying to find out how to set APN on Wiko Fever SE? Wiko Fever SE is an Android phone by Wiko. In this tutorial, I'll explain how to configure APN (Access Point Name), internet, hotspot, and MMS settings on Wiko Fever SE 2025. These settings are suitable for 2G, 3G, 4G, LTE, VoLTE, and 5G networks. Get high-speed internet on Wiko Fever SE with any SIM by following this guide.
What is APN Settings for Wiko Fever SE?
APN stands for Access Point Name. To access the internet on Wiko Fever SE, you must configure APN Settings on your device. It is the name of a gateway between a GSM, GPRS, 2G, 3G, 4G, LTE, VoLTE, or 5G mobile network and another computer network.
Wiko Fever SE APN Settings
How to set APN on Wiko Fever SE? To set/configure APN -Access Point Name on your Wiko Fever SE, go to
- Settings
- Mobile Network
- Access Point Name
- Add Access Point
- And follow the next instructions
In the new access point name, fill the blanks according to the following table (APN Fields). Just fill in the bold items only and keep the rest of the fields unchanged.
| Name | Internet-Profile |
|---|---|
| APN | mms |
| Proxy | Not Set |
| Port | Not Set |
| Username | Not Set |
| Password | Not Set |
| Server | Not Set |
| MMSC | Not Set |
| MMS Proxy | Not Set |
| MMS Port | Not Set |
| MCC | 470 |
| MNC | 02 |
| Authentication type | Not set/None |
| APN Type | default,supl |
| APN protocol | IPv4/IPv6 |
| APN roaming Protocol | IPv4/IPv6 |
| APN enable/disable | APN enabled |
| Bearer | Unspecified |
| MVNO type | None |
| MVNO Value | Not Set |
For better speed and to ensure exact APN settings for Wiko Fever SE, based on your SIM, follow the instruction given below.
- Go to Country
- From the dropdown menu, select your country
- Then choose your SIM/Carrier name
- Finally, you will find detailed instruction
Wiko Fever SE MMS Settings
How to set MMS on Wiko Fever SE? MMS stands for Multimedia Messaging Service. To receive MMS on your Wiko Fever SE, you must set MMS settings.
| Name | MMS-Profile |
|---|---|
| APN | mms |
| Proxy | Not Set |
| Port | Not Set |
| Username | Not Set |
| Password | Not Set |
| Server | Not Set |
| MMSC | Not Set |
| MMS Proxy | Not Set |
| MMS Port | Not Set |
| MCC | 470 |
| MNC | 02 |
| Authentication type | Not set/None |
| APN Type | default,supl |
| APN protocol | IPv4/IPv6 |
| APN roaming Protocol | IPv4/IPv6 |
| APN enable/disable | APN enabled |
| Bearer | Unspecified |
| MVNO type | None |
| MVNO Value | Not Set |
For better speed and to ensure exact MMS settings for Wiko Fever SE, based on your SIM, follow the instruction given below.
- Go to Country
- From the dropdown menu, select your country
- Then choose your SIM/Carrier name
- Finally, you will find detailed instruction
I hope this article helps you to set APN and MMS configurations on Wiko Fever SE. If you still cannot access the internet after successfully configuring APN on your Wiko Fever SE, let us know by leaving a comment below.
