Wiko Ufeel go APN Settings 2025: Set Up APN and MMS
Looking for steps to set APN on Wiko Ufeel go? Wiko Ufeel go is an Android handset developed by Wiko. In this guide, I'll demonstrate how to configure APN (Access Point Name), internet, hotspot, and MMS settings on Wiko Ufeel go 2025. These configurations are effective for 2G, 3G, 4G, LTE, VoLTE, and 5G networks. Achieve high-speed internet on Wiko Ufeel go with any SIM using this process.
What is APN Settings for Wiko Ufeel go?
APN stands for Access Point Name. To access the internet on Wiko Ufeel go, you must configure APN Settings on your device. It is the name of a gateway between a GSM, GPRS, 2G, 3G, 4G, LTE, VoLTE, or 5G mobile network and another computer network.
Wiko Ufeel go APN Settings
How to set APN on Wiko Ufeel go? To set/configure APN -Access Point Name on your Wiko Ufeel go, go to
- Settings
- Mobile Network
- Access Point Name
- Add Access Point
- And follow the next instructions
In the new access point name, fill the blanks according to the following table (APN Fields). Just fill in the bold items only and keep the rest of the fields unchanged.
| Name | Internet-Profile |
|---|---|
| APN | mms |
| Proxy | Not Set |
| Port | Not Set |
| Username | Not Set |
| Password | Not Set |
| Server | Not Set |
| MMSC | Not Set |
| MMS Proxy | Not Set |
| MMS Port | Not Set |
| MCC | 470 |
| MNC | 02 |
| Authentication type | Not set/None |
| APN Type | default,supl |
| APN protocol | IPv4/IPv6 |
| APN roaming Protocol | IPv4/IPv6 |
| APN enable/disable | APN enabled |
| Bearer | Unspecified |
| MVNO type | None |
| MVNO Value | Not Set |
For better speed and to ensure exact APN settings for Wiko Ufeel go, based on your SIM, follow the instruction given below.
- Go to Country
- From the dropdown menu, select your country
- Then choose your SIM/Carrier name
- Finally, you will find detailed instruction
Wiko Ufeel go MMS Settings
How to set MMS on Wiko Ufeel go? MMS stands for Multimedia Messaging Service. To receive MMS on your Wiko Ufeel go, you must set MMS settings.
| Name | MMS-Profile |
|---|---|
| APN | mms |
| Proxy | Not Set |
| Port | Not Set |
| Username | Not Set |
| Password | Not Set |
| Server | Not Set |
| MMSC | Not Set |
| MMS Proxy | Not Set |
| MMS Port | Not Set |
| MCC | 470 |
| MNC | 02 |
| Authentication type | Not set/None |
| APN Type | default,supl |
| APN protocol | IPv4/IPv6 |
| APN roaming Protocol | IPv4/IPv6 |
| APN enable/disable | APN enabled |
| Bearer | Unspecified |
| MVNO type | None |
| MVNO Value | Not Set |
For better speed and to ensure exact MMS settings for Wiko Ufeel go, based on your SIM, follow the instruction given below.
- Go to Country
- From the dropdown menu, select your country
- Then choose your SIM/Carrier name
- Finally, you will find detailed instruction
I hope this article helps you to set APN and MMS configurations on Wiko Ufeel go. If you still cannot access the internet after successfully configuring APN on your Wiko Ufeel go, let us know by leaving a comment below.
