Wiko View2 Go APN Settings 2025: Set Up APN and MMS
Are you searching for the way to set up APN on Wiko View2 Go? Wiko View2 Go is an Android smartphone crafted by Wiko. In this guide, I will explain how to configure APN (Access Point Name), internet, hotspot settings, and MMS on Wiko View2 Go 2025. These settings will work seamlessly for 2G, 3G, 4G, LTE, VoLTE, and 5G networks. Enjoy high-speed internet on your Wiko View2 Go with any SIM card using this method.
What is APN Settings for Wiko View2 Go?
APN stands for Access Point Name. To access the internet on Wiko View2 Go, you must configure APN Settings on your device. It is the name of a gateway between a GSM, GPRS, 2G, 3G, 4G, LTE, VoLTE, or 5G mobile network and another computer network.
Wiko View2 Go APN Settings
How to set APN on Wiko View2 Go? To set/configure APN -Access Point Name on your Wiko View2 Go, go to
- Settings
- Mobile Network
- Access Point Name
- Add Access Point
- And follow the next instructions
In the new access point name, fill the blanks according to the following table (APN Fields). Just fill in the bold items only and keep the rest of the fields unchanged.
| Name | Internet-Profile |
|---|---|
| APN | mms |
| Proxy | Not Set |
| Port | Not Set |
| Username | Not Set |
| Password | Not Set |
| Server | Not Set |
| MMSC | Not Set |
| MMS Proxy | Not Set |
| MMS Port | Not Set |
| MCC | 470 |
| MNC | 02 |
| Authentication type | Not set/None |
| APN Type | default,supl |
| APN protocol | IPv4/IPv6 |
| APN roaming Protocol | IPv4/IPv6 |
| APN enable/disable | APN enabled |
| Bearer | Unspecified |
| MVNO type | None |
| MVNO Value | Not Set |
For better speed and to ensure exact APN settings for Wiko View2 Go, based on your SIM, follow the instruction given below.
- Go to Country
- From the dropdown menu, select your country
- Then choose your SIM/Carrier name
- Finally, you will find detailed instruction
Wiko View2 Go MMS Settings
How to set MMS on Wiko View2 Go? MMS stands for Multimedia Messaging Service. To receive MMS on your Wiko View2 Go, you must set MMS settings.
| Name | MMS-Profile |
|---|---|
| APN | mms |
| Proxy | Not Set |
| Port | Not Set |
| Username | Not Set |
| Password | Not Set |
| Server | Not Set |
| MMSC | Not Set |
| MMS Proxy | Not Set |
| MMS Port | Not Set |
| MCC | 470 |
| MNC | 02 |
| Authentication type | Not set/None |
| APN Type | default,supl |
| APN protocol | IPv4/IPv6 |
| APN roaming Protocol | IPv4/IPv6 |
| APN enable/disable | APN enabled |
| Bearer | Unspecified |
| MVNO type | None |
| MVNO Value | Not Set |
For better speed and to ensure exact MMS settings for Wiko View2 Go, based on your SIM, follow the instruction given below.
- Go to Country
- From the dropdown menu, select your country
- Then choose your SIM/Carrier name
- Finally, you will find detailed instruction
I hope this article helps you to set APN and MMS configurations on Wiko View2 Go. If you still cannot access the internet after successfully configuring APN on your Wiko View2 Go, let us know by leaving a comment below.
